Non-Metallic Mineral Processing Equipment
Trough Wash Machine
The Xinhai trough wash machine scrubs clay, coatings and fine impurities from granular non-metallic mineral feeds. It uses a rotating shaft with angled flights that lift and tumble the material through a water bath, producing a clean, washed product ready for downstream separation stages.
Technical parameters
It follows a wet screen or crusher and sits ahead of classification, magnetic separation or flotation. Removing clay early protects downstream equipment from blinding and reduces reagent consumption.
The CXK series is offered in multiple sizes to suit a range of throughputs and feed dimensions. Larger internal length and width correspond to higher production capacity and coarser feed tolerance. Machine inclination and installed power scale with the scrubbing intensity needed for the specific ore type and contamination level.
| Model | Internal Length (mm) | Internal Width (mm) | Production Capacity (t/h) | Feed Particle Size (mm) | Machine Inclination (°) | Power (kW) | Weight (kg) |
|---|---|---|---|---|---|---|---|
| CXK-1566 | 6660 | 1500 | 35-40 | <75 | 10.84 | 22 | 15800 |
| CXK-1676 | 7360 | 1600 | 40-50 | <75 | 10 | 37 | 17168 |
Standard-model catalogue figures. Actual capacity, power draw and wear life shift with ore properties, feed gradation and circuit conditions. Use them to shortlist, then confirm the duty by testwork, flowsheet calculation and a written confirmation from the manufacturer.
What decides the selection
Before selecting a model, the project team should characterise the feed: particle size distribution, clay content, and the required degree of scrubbing. Water availability and quality constraints must be confirmed, as the machine operates with a continuous water stream. The target throughput and the nature of the downstream equipment influence the final model choice.
- Surface contamination of the mineral
- Clay content
- Particle size
- Scrubbing intensity
- Water consumption
- Product whiteness or purity target
- Downstream magnetic, flotation or acid-leach circuit
Other non-metallic machines
- High-Efficiency Agitation Scrubber8 models
- Desliming Bucket10 models
- Hinder Setter13 models
ISO 9001 / ISO 14001 / ISO 45001 / ISO 9712 / CE / CSA W47.1 / CNAS accredited laboratory
Send the duty, get a sized proposal
Tell us the ore, the throughput and the target product. Our process engineers come back with a flowsheet position, a model shortlist and the testwork we would need to confirm it.