Conditioning
Agitation Equipment
Agitation tanks maintain slurry in suspension between grinding and separation, delivering uniform pulp density to downstream equipment. They also blend reagents, provide residence time for leaching and prevent coarse solids from settling.
Equipment in this category
The choice of tank type depends on whether the duty is simple homogenisation, reagent conditioning, heavy agitation of dense slurries, or a step like aeration or lifting. Each variable points to a different tank family.
The range starts with a standard agitation tank for light-duty homogenisation and moves through high-efficiency units for intensive mixing, chemical reagent tanks with corrosion-resistant linings, lifting tanks for pumping duty, high-density designs for thick pulps, coarse sand tanks for fast-settling solids, and cone-bottom tanks for complete drainage.
- High-Efficiency Agitation Tank
- Agitation Tank
- Agitation Tank for Chemical Reagent
- Lifting Agitation Tankcat.
- High-Density Agitation Tankcat.
- Coarse Sand Agitation Tankcat.
- Cone-Bottom Agitation Tankcat.
Names marked cat. follow the equipment handbook rather than the product catalogue naming.
What decides the selection
Correct sizing begins with laboratory settling tests and rheology measurements on your specific pulp. These determine impeller speed, tank volume and the power drawn per cubic metre. Corrosion coupons and chemical compatibility trials confirm the lining and wetted materials before the tank geometry is locked in.
- Tank volume and residence time
- Pulp density and particle size
- Slurry viscosity
- Impeller type
- Power density
- Corrosion-resistant materials
- Whether lifting or aeration duty is required
Technical parameters
60 models across 6 machine types, as published in the Xinhai equipment application manual.
These are standard-model catalogue figures. Actual capacity, power draw and wear life shift with ore properties, feed gradation and circuit conditions. Treat them as a shortlisting aid, not as a performance guarantee for your duty. Final selection rests on testwork, flowsheet calculation and a written confirmation from the manufacturer.
Ordinary Agitation Tank
| Model | Tank Diameter (mm) | Tank Height (mm) | Effective Volume ( m3 ) | Impeller Diameter (mm) | Impeller Speed (r/min) | Motor Power (kW) | Weight (kg) |
|---|---|---|---|---|---|---|---|
| BJ-500×500 | 500 | 500 | 0.0785 | 160 | 493 | 0.55 | 120 |
| BJ-750×750 | 750 | 750 | 0.25 | 240 | 530 | 1.5 | 240 |
| BJ-1000×1000 | 1000 | 1000 | 0.58 | 310 | 530 | 2.2 | 680 |
| BJ-1250×1250 | 1250 | 1250 | 1.15 | 310 | 492 | 2.2 | 820 |
| BJ-1500×1500 | 1500 | 1500 | 2.2 | 400 | 320 | 3 | 790 |
| BJ-2000×2000 | 2000 | 2000 | 4.4 | 550 | 230 | 5.5 | 1800 |
| BJ-2500×2500 | 2500 | 2500 | 9.2 | 630 | 230 | 7.5 | 2766 |
| BJ-3000×3000 | 3000 | 3000 | 19.1 | 700 | 210 | 18.5 | 4140 |
| BJ-3500×3500 | 3500 | 3500 | 24 | 850 | 193 | 22 | 5980 |
| BJ-4000×4000 | 4000 | 4000 | 45 | 1000 | 163 | 30 | 7723 |
| BJ-4500×4500 | 4500 | 4500 | 50.4 | 1200 | 130 | 45 | 9100 |
Efficient Agitation Tank
| Model | Tank Diameter (mm) | Tank Height (mm) | Effective Volume ( m3 ) | Impeller Diameter (mm) | Impeller Speed (r/min) | Motor Power (kW) | Weight (kg) |
|---|---|---|---|---|---|---|---|
| GBJ-1000×1000 | 1000 | 1000 | 0.58 | 240 | 530 | 2.2 | 500 |
| GBJ-1250×1250 | 1250 | 1250 | 1.15 | 240 | 350 | 3 | 820 |
| GBJ-1500×1500 | 1500 | 1500 | 2.2 | 420 | 320 | 5.5 | 1350 |
| GBJ-2000×2000 | 2000 | 2000 | 4.4 | 560 | 240 | 7.5 | 3173 |
| GBJ-2500×2500 | 2500 | 2500 | 9.2 | 560 | 272 | 15 | 3939 |
| GBJ-3000×3000 | 3000 | 3000 | 19.1 | 700 | 220 | 18.5 | 6626 |
| GBJ-3500×3500 | 3500 | 3500 | 31 | 700 | 248 | 22 | 7581 |
| GBJ-4000×4000 | 4000 | 4000 | 45 | 1000 | 151 | 37 | 11072 |
| GBJ-4500×4500 | 4500 | 4500 | 57 | 1050 | 151 | 55 | 15385 |
Lifting Agitation Tank
| Model | Tank Diameter (mm) | Tank Height (mm) | Effective Volume ( m3 ) | Lifting Height (mm) | Impeller Diameter (mm) | Impeller Speed (r/min) | Motor Power (kW) | Weight (kg) |
|---|---|---|---|---|---|---|---|---|
| TBJ-1000×1266 | 1000 | 1266 | 0.9 | 980 | 300 | 460 | 5.5 | 700 |
| TBJ-1250×1510 | 1250 | 1510 | 1.396 | 1220 | 400 | 460 | 7.5 | 780 |
| TBJ-1500×1800 | 1500 | 1800 | 2.8 | 1470 | 450 | 464 | 11 | 1022 |
| TBJ-2000×2000 | 2000 | 2000 | 5.8 | 1570 | 600 | 312 | 18.5 | 3122 |
| TBJ-2500×2500 | 2500 | 2500 | 11.5 | 2070 | 600 | 310 | 22 | 3760 |
| TBJ-3000×3000 | 3000 | 3000 | 18.2 | 2570 | 750 | 263.35 | 37 | 5576 |
High-Concentration Agitation Tank
| Model | Tank Diameter (mm) | Tank Height (mm) | Effective Volume ( m3 ) | Impeller Diameter (mm) | Impeller Speed (r/min) | Motor Power (kW) | Weight (kg) |
|---|---|---|---|---|---|---|---|
| BJN-1500×1500 | 1500 | 1500 | 2.4 | 500 | 280 | 11 | 1658 |
| BJN-2000×2000 | 2000 | 2000 | 4.4 | 900 | 200 | 11 | 1860 |
| BJN-2500×2500 | 2500 | 2500 | 11.38 | 1300 | 160 | 22 | 3317 |
| BJN-3000×3000 | 3000 | 3000 | 19.1 | 1300 | 160 | 22 | 4660 |
| BJN-4000×4000 | 4000 | 4000 | 40 | 1450 | 140 | 45 | 7673 |
Coarse Pulp Agitation Tank
| Model | Effective Volume (m3) | Impeller Diameter (r/min) | Impeller Speed (mm) | Motor Power (kW) | Weight (kg) |
|---|---|---|---|---|---|
| BJC-1000×1000 | 0.7 | 661 | 285 | 7.5 | 570 |
| BJC-1250×1250 | 1.3 | 432 | 430 | 15 | 1271 |
| BJC-1500×1500 | 2.2 | 432 | 430 | 15 | 1431 |
| BJC-2000×2000 | 5 | 254 | 720 | 37 | 2935 |
| BJC-2500×2500 | 10.5 | 254 | 720 | 37 | 3898 |
| BJC-3000×3000 | 18.5 | 175 | 1000 | 55 | 6065 |
| BJC-3500×3500 | 29.5 | 175 | 1000 | 55 | 7694 |
| BJC-4000×4000 | 45 | 152 | 1150 | 90 | 11244 |
| BJC-4500×4500 | 63 | 145 | 1300 | 110 | 13692 |
Cone-Bottom Agitation Tank
| Model | Tank Diameter (mm) | Tank Height (mm) | Effective Volume ( m3 ) | Impeller Diameter (mm) | Impeller Speed (r/min) | Motor Power (kW) | Weight (kg) |
|---|---|---|---|---|---|---|---|
| BJZ-750×750 | 750 | 750 | 0.25 | 240 | 530 | 1.5 | 235 |
| BJN-1000×1000 | 1000 | 1000 | 0.62 | 240 | 530 | 1.5 | 380 |
| BJN-1250×1250 | 1250 | 1250 | 1.51 | 310 | 492 | 2.2 | 510 |
| BJN-1500×1500 | 1500 | 1500 | 2.38 | 400 | 320 | 3 | 1375 |
| BJN-2000×2000 | 2000 | 2000 | 5 | 550 | 300 | 7.5 | 1751 |
| BJN-2500×2500 | 2500 | 2500 | 9.2 | 630 | 230 | 11 | 2076 |
| Model | Tank Diameter (mm) | Tank Height (mm) | Effective Volume ( m3 ) | Impeller Speed (r/min) | Motor Power (kW) | Weight (kg) |
|---|---|---|---|---|---|---|
| BJW-500×500 | 500 | 500 | 0.094 | 493 | 0.55 | 120 |
| BJW-750×750 | 750 | 750 | 0.25 | 530 | 1.5 | 230 |
| BJW-1000×1000 | 1000 | 1000 | 0.35 | 530 | 1.5 | 362 |
| BJW-1250×1250 | 1250 | 1250 | 1.15 | 492 | 2.2 | 435 |
| BJW-1500×1500 | 1500 | 1500 | 2.2 | 320 | 3 | 739 |
| BJW-2000×2000 | 2000 | 2000 | 4.4 | 230 | 5.5 | 1720 |
| BJW-2500×2500 | 2500 | 2500 | 9.2 | 230 | 7.5 | 2440 |
| BJW-3000×3000 | 3000 | 3000 | 19.1 | 210 | 18.5 | 4613 |
| BJW-3500×3500 | 3500 | 3500 | 30 | 230 | 22 | 5597 |
| Model | Tank Diameter (mm) | Tank Height (mm) | Effective Volume( m3 ) | Motor Power (kW) | Weight (kg) |
|---|---|---|---|---|---|
| BJS-1000×1000 | 1000 | 1000 | 0.86 | 1.5 | 380 |
| BJS-1250×1250 | 1250 | 1250 | 1.3 | 1.5 | 508 |
| BJS-1500×1500 | 1500 | 1500 | 1.83 | 2.2 | 778 |
| BJS-2000×2000 | 2000 | 2000 | 5 | 2.2 | 1922 |
| BJS-2500×2500 | 2500 | 2500 | 10 | 2.2 | 2495 |
ISO 9001 / ISO 14001 / ISO 45001 / ISO 9712 / CE / CSA W47.1 / CNAS accredited laboratory
Send the duty, get a sized proposal
Tell us the ore, the throughput and the target product. Our process engineers come back with a flowsheet position, a model shortlist and the testwork we would need to confirm it.