Classification Equipment
High-Frequency Fine Mesh Vibrating Screen
The high-frequency fine mesh vibrating screen separates fine particles from a slurry feed using rapid, low-amplitude vibration. In a closed-circuit grinding setup, it returns oversize to the mill and sends undersize forward.
Technical parameters
Fine aperture mesh is agitated at high frequency to resist blinding and maintain a sharp cut. It suits duties where a hydrocyclone struggles with near-density or fibrous material.
The model table lists configurations with different numbers of screen deck layers, growing surface areas, and installed motor powers. Larger models process greater volumes; smaller ones offer compact footprints for pilot or satellite plants. The application column suggests typical ore-type or duty matches.
| Model | Number of Screen Box Layers | Screen Surface Area (m2) | Power (kW) | Application |
|---|---|---|---|---|
| FG1014 | 1 | 1.4 | 2x0.55 | Wet Classification |
| FG1021 | 1 | 2.1 | 2x1.5 | |
| FG1028 | 1 | 2.8 | 2x1.5 | |
| FG1440 | 1 | 5.6 | 2.8 | |
| D3Z1014 | 3 | 4.2 | 4.4 | |
| D4Z1014 | 4 | 5.6 | 4.4 | |
| D5Z1014 | 5 | 7 | 4.4 | |
| D3Z1021 | 3 | 6.3 | 4.4 | |
| D4Z1021 | 4 | 8.4 | 4.4 | |
| D5Z1021 | 5 | 10.5 | 4.4 | |
| D3Z1216 | 3 | 5.76 | 4.4 | |
| D4Z1216 | 4 | 7.68 | 4.4 | |
| D5Z1216 | 5 | 9.6 | 4.4 | |
| D2Z1224 | 2 | 5.76 | 4.4 | |
| D3Z1224 | 3 | 8.64 | 4.4 | |
| D4Z1224 | 4 | 11.25 | 4.4 | |
| D5Z1224 | 5 | 14.4 | 6.8 |
Standard-model catalogue figures. Actual capacity, power draw and wear life shift with ore properties, feed gradation and circuit conditions. Use them to shortlist, then confirm the duty by testwork, flowsheet calculation and a written confirmation from the manufacturer.
What decides the selection
Before selecting a model, define the feed’s particle size distribution, moisture content, and abrasiveness. The required cut point and volumetric throughput steer the choice of screen area and deck count. Confirm whether the duty is wet classification or dry sizing, as this affects deck inclination and water addition.
- Target cut size
- Feed pressure and density
- Slurry specific gravity
- Throughput
- Classification efficiency
- Overflow fineness and underflow density
- Wear-resistant lining material
- Number of units in parallel
Other classifying machines
- Spiral Classifier28 models
- XC I Hydrocyclone7 models
- XC II Classification and Thickening Hydrocyclone29 models
- XC III Hydrocyclone10 models
- XHCV Hydrocyclone6 models
- XN Hydrocyclone3 models
- Airflow Classifier8 models
- Multi-Rotor Airflow Classifier8 models
ISO 9001 / ISO 14001 / ISO 45001 / ISO 9712 / CE / CSA W47.1 / CNAS accredited laboratory
Send the duty, get a sized proposal
Tell us the ore, the throughput and the target product. Our process engineers come back with a flowsheet position, a model shortlist and the testwork we would need to confirm it.