Material Handling

Conveying Equipment

Conveying equipment links crushing, grinding, separation and dewatering circuits, moving ore reliably between process stages. It handles horizontal, inclined and vertical transport across the plant.

Request a Quote Selection variables

01Conveying capacity

02Distance and lift

03Lump size and material temperature

04Inclination angle

05Belt speed

06Drive power

Equipment in this category

On this page you compare five conveying machine types - belt, walled belt, screw, mobile belt and bucket elevators - to decide which best fits the material, layout and capacity of your operation.

Belt conveyors move bulk material along horizontal and gently inclined paths. Walled belt conveyors handle steeper angles and sticky feeds. Screw conveyors suit shorter, dust-tight transfers. Mobile belt conveyors provide flexible pit or stockpile links. Bucket elevators lift material vertically in compact spaces. Each type occupies a distinct duty range based on distance, lift and material characteristics.

Belt Conveyor
Walled Belt Conveyor
Screw Conveyor
Mobile Belt Conveyorcat.
Bucket Elevatorcat.

Names marked cat. follow the equipment handbook rather than the product catalogue naming.

What decides the selection

Start by defining conveying capacity, distance and lift, plus lump size and material temperature. These come from the mass balance and site layout. Inclination angle determines belt or bucket type, while belt speed and drive power follow. Transfer point geometry, take-up type, and dust and safety requirements finalise the design. Testwork on bulk density, angle of repose and abrasiveness confirms handling assumptions.

Conveying capacity
Distance and lift
Lump size and material temperature
Inclination angle
Belt speed
Drive power
Transfer point design
Take-up arrangement
Dust control and safety protection

Technical parameters

175 models across 3 machine types, as published in the Xinhai equipment application manual.

Parameter boundary

These are standard-model catalogue figures. Actual capacity, power draw and wear life shift with ore properties, feed gradation and circuit conditions. Treat them as a shortlisting aid, not as a performance guarantee for your duty. Final selection rests on testwork, flowsheet calculation and a written confirmation from the manufacturer.

Belt Conveyor

Belt Conveyor technical parameters, 41 models
Belt Width (mm)	Sidewall Height (mm)	Partition Spacing (mm)	Inclination Angleβ (Conveying Capacity at 1 m/s)
30°	40°	50°	60°	70°	90°
500	80	126	39	31	25	20	17	10
252	21	16	13	11	/	/
120	126	/	/	60	50	41	25
252	52	40	32	26	21	/
378	34	26	/	/	/	/
160	252	65	52	42	34	28	17
378	45	34	27	23	18	/
650	80	126	59	47	37	31	25	15
252	32	24	19	16	/	/
120	126	/	/	90	75	62	38
252	78	60	48	39	32	/
378	52	40	/	/	/	/
160	252	105	85	68	55	45	28
378	73	56	45	36	30	/
800	120	126	/	/	113	95	77	47
252	99	76	60	49	40	/
378	65	50	/	/	/	/
160	252	136	110	88	72	58	36
378	94	72	58	47	38	/
200	252	/	/	139	113	92	57
378	148	114	91	74	61	37
504	113	87	/	/	/	/
1000	160	252	186	150	120	98	80	49
378	129	99	79	64	52	/
200	252	/	/	195	159	130	80
378	207	160	128	105	85	52
504	159	122	/	/	/	/
240	252	/	/	/	229	187	115
378	283	231	185	151	123	76
504	229	176	141	/	/	/
1200	160	252	223	180	144	117	96	56
378	154	118	95	77	63	/
200	252	/	/	235	191	156	96
378	250	193	154	126	103	63
504	191	147	/	/	/	/
240	252	/	/	/	278	226	139
378	342	280	224	183	149	91
504	278	213	170	/	/	/
300	336	410	352	290	237	193	118
504	350	276	221	180	147	90

Belt Conveyor, continued (28 rows)
Belt Width (mm)	Sidewall Height (mm)	β Inclination Angleβ
30°	40°	50°	60°	70°	90°
500	80	2	2	1.6	1.6	1.25	1
100	100	80	80	50	50
120	2	2	1.6	1.6	1.25	1
120	120	120	120	60	60
160	2	2	1.6	1.6	1.25	1
120	120	140	140	100	80
650	80	1.6	1.6	1.6	1.6	1.25	1.25
120	2	2	1.6	1.6	1.25	1.25
140	140	120	120	60	60
160	2	2	1.6	1.6	1.25	1.25
160	160	140	140	100	80
800	120	2	2	1.6	1.6	1.6	1.25
160	2.5	2	1.6	1.6	1.6	1.25
180	180	140	140	100	80
200	2.5	2	1.6	1.6	1.6	1.25
200	200	180	180	140	100
1000	160	2.5	2.5	1.6	1.6	1.6	1.25
250	250	180	180	140	100
240	2.5	2.5	2	1.6	1.6	1.25
280	280	220	220	180	140
1200	160	2.5	2.5	1.6	1.6	1.6	1.25
200	200	140	140	100	80
200	3.15	2.5	2	1.6	1.6	1.25
240	3.15	3.15	2.5	1.6	1.6	1.25
300	3.15	3.15	2.5	2	2	1.25
310	310	280	280	200	160
Note: The upper line of the table is vmax (m/s), and the lower line is amax (mm)

Belt Conveyor, continued (8 rows)
Model	Belt Width (mm)	Belt Speed (m/s)	Maximum Inclination Angle (°)	Conveying Capacity (m3/h)	Conveying Length (m)	Maximum Height (m)	Minimum Height (m)	Motor Power (kW)	Weight (kg)
PY-50	500	1.2	19	80	10	3.73	0.5	3	847
15	5.44	1.27	4	1123
20	7.09	1.27	5.5	1540
PY-65	650	1.2	19	135	10	3.73	0.5	4	1189
15	5.44	1.27	5.5	1950
20	7.09	1.27	7.5	2300
PY-80	800	1.6	19	262	15	5.44	1.27	7.5	2700
20	7.09	1.27	11	3100

Screw Conveyor

Screw Conveyor technical parameters, 7 models
Model	Screw Diameter (mm)	Magnesium Powder Conveying Capacity (t/h)	Cement Conveying Capacity (t/h)	Soda Ash Conveying Capacity (t/h)	Inlet Size (mm)	Inlet Height (mm)	Outlet Size (mm)	Outlet Height (mm)
GX-150	150	4.5	4.1	3	170×170	75	176×176	135
GX-200	200	8.5	7.9	6.7	220×220	100	226×226	135
GX-250	250	16.5	15.6	10.7	270×270	120	276×276	195
GX-300	300	23.3	21.2	18	320×320	140	328×328	225
GX-400	400	54	51	35.5	420×420	160	428×428	280
GX-500	500	89	85	70	528×528	160	536×536	340
GX-600	600	139	134	97	628×628	180	636×636	430

Bucket Lifter

Bucket Lifter technical parameters, 13 models
Model	Lifting Capacity (m3/h)	Maximum Particle Size (mm)
Allowed Percentage Occupancy %
10	25	50	75	100
TB-NE15	16	65	50	40	30	25
TB-NE30	31	90	75	58	47	40
TB-NE50	60	90	75	58	47	40
TB-NE100	110	130	105	80	65	55
TB-NE150	15	130	105	80	65	55
TB-NE200	220	170	135	100	85	70
TB-NE300	320	170	135	100	85	70
TB-NE400	441	205	165	125	105	90
TB-NE500	470	240	190	145	120	100
TB-NE600	600	240	190	145	120	100
TB-NE800	800	275	220	165	135	110

Bucket Lifter, continued (78 rows)
Model	Conveying Capacity (m3/h)	Drive Device	Maximum Height (m)	Suitable Materials
Power (kW)	Gearbox Ratio	Material Capacity (t/m3)
0.6	0.8	1	1.2	1.4	1.6	1.8	2
TB-NE15	10	1.5	47	30.28	28.78	27.28	25.78	21.78	17.28	15.28	13.28	Powder, Small Granular, Bulk
2.2	47					24.28	23.28	22.28	21.28
16	1.5	29	30.78	24.28	17.28	14.28	11.78	8.28	7.28	6.28	Powder, Small Granular
2.2	29		28.78	27.28	23.28	18.28	15.78	13.78	12.28
3	29				25.78	24.28	23.28	19.28	17.28
4	29							22.28	21.28
TB-NE30	18.5	1.5	47	28.13	18.63	14.63	11.63	8.13	7.13	6.13	5.13	Powder, Small Granular, Bulk
2.2	47	42.13	31.13	24.13	18.13	15.63	13.13	9.63	8.63
3	47	47.63	43.13	34.13	28.13	23.63	18.63	16.63	14.63
4	47		44.13	41.13	38.13	32.13	28.13	24.63	22.13
5.5	47				38.63	36.13	34.13	32.13	30.63
31	1.5	29	14.63	8.63	6.63	5.13	4.13				Powder, Small Granular
2.2	29	24.13	16.13	12.63	8.63	7.13	5.63	5.13	4.13
3	29	33.63	24.63	17.63	14.63	12.13	8.63	7.63	6.63
4	29	45.63	33.63	28.63	21.63	17.13	14.63	12.63	9.63
5.5	29	47.13	43.63	37.63	30.63	26.13	22.63	18.13	16.13
7.5	29			40.63	38.13	35.63	31.63	27.63	24.63
11	29						33.63	31.63	29.63
TB-NE50	35	1.5	47	12.63	7.63	5.63	4.63	3.63				Powder, Small Granular, Bulk
2.2	47	19.63	14.13	9.13	7.63	6.13	5.13	4.13	3.63
3	47	29.63	21.63	15.63	12.63	9.13	7.63	6.63	5.63
4	47	40.63	29.63	23.63	17.63	14.63	12.63	9.63	8.13
5.5	47	49.13	41.63	33.13	27.13	23.13	18.13	16.13	14.13
7.5	47		45.63	41.63	37.63	32.13	27.63	24.63	21.63
11	47				38.63	36.63	34.13	32.13	30.13
60	1.5	29	5.63	3.63							Powder, Small Granular
2.2	29	9.13	6.13	4.63	3.63
3	29	15.13	9.13	7.13	5.63	4.63	3.63	3.13
4	29	22.63	15.13	10.13	8.13	6.63	5.63	4.63	4.13
5.5	29	32.13	23.63	17.13	13.63	9.63	8.13	7.13	6.13
7.5	29	44.63	32.63	25.63	19.63	16.63	14.13	12.13	9.13
11	29	48.63	44.63	38.63	32.13	27.13	23.63	19.13	16.63
15	29			41.13	38.13	35.63	33.13	28.63	25.63
18.5	23							31.13	29.13
TB-NE100	75	5.5	47	25.15	16.65	13.15	8.65	7.65	6.15	5.15		Powder, Small Granular, Bulk
7.5	47	35.15	25.65	18.65	15.15	12.65	9.15	7.65	6.65
11	47	49.15	38.65	30.15	25.15	19.65	16.65	14.65	13.15
15	47		44.65	41.15	35.15	29.65	25.65	22.65	18.65
18.5	29				37.65	35.15	32.15	28.65	25.65
22	29						32.65	30.65	28.65
110	5.5	29	15.15	9.15	6.65	5.65					Powder, Small Granular
7.5	29	23.15	15.63	12.15	8.15	6.65	5.65
11	29	35.15	25.65	18.65	15.15	12.65	9.15	7.65	6.65
15	29	48.65	35.65	28.15	23.15	18.15	15.65	13.65	12.15
18.5	23		44.15	35.65	29.15	24.65	19.65	17.15	15.15
22	23			40.65	35.15	29.65	25.65	22.65	18.65
30	23				37.15	34.65	32.15	30.15	28.15
TB-NE150	112	5.5	47	14.6	9.1	6.6	5.1	4.1				Powder, Small Granular, Bulk
7.5	47	22.6	15.1	11.6	8.1	6.6	5.6	4.6
11	47	34.6	25.1	18.1	14.6	12.6	9.1	7.6	6.6
15	47	47.6	35.1	27.6	22.6	17.6	15.1	13.1	11.6
18.5	29	52.6	43.6	34.6	28.6	24.1	19.1	16.6	15.1
22	29		47.6	41.6	34.6	29.1	25.1	22.1	18.1
30	29			43.1	39.6	36.1	33.6	31.1	27.6
37	29							31.6	29.1
165	7.5	29	13.6	8.1	6.1	4.6					Powder, Small Granular
11	29	22.6	15.1	9.6	7.6	6.6	5.6	4.6
15	29	31.6	23.1	16.6	13.6	9.6	8.1	7.1	6.1
18.5	23	39.6	29.1	22.6	17.1	14.6	12.6	9.1	8.1
22	23	47.6	35.1	27.6	22.6	17.6	15.1	13.1	9.6
30	23	51.6	46.6	38.6	31.6	26.6	23.1	18.6	16.6
37	23			42.1	38.6	33.6	29.1	25.6	22.6
45	23					35.6	33.1	30.6	28.6
TB-NE200	176	15	43	28.23	20.73	13.23	10.23	8.23	6.73	6.23	5.73	Powder, Small Granular, Bulk
18.5	29	39.23	25.73	19.73	13.23	11.23	9.73	8.23	6.73
22	29	47.23	34.73	24.23	19.73	14.23	11.73	10.23	9.23
30	29		47.23	37.23	28.23	23.73	20.73	17.73	13.23
37	29			47.23	39.23	33.23	25.73	23.23	20.23
45	29				46.23	40.73	35.23	28.23	25.23
220	18.5	23	27.23	19.23	12.23	9.73	8.23	6.73	5.23		Powder, Small Granular
22	23	35.73	23.23	18.23	12.23	10.23	8.23	7.23	5.73
30	23	49.73	36.73	26.23	21.23	17.73	12.23	11.23	9.73
37	23		46.23	35.73	27.23	22.73	19.23	13.73	12.23
45	23			44.23	36.23	28.23	24.23	21.23	19.23
55	23				45.23	38.23	32.73	26.23	23.23
75	23					52.23	46.23	40.73	36.73

Previous stageFeeding Equipment Next stageSteel Silos

30+

years in mining equipment

1,000+

equipment models

70+

ore types processed

100+

countries reached

ISO 9001 / ISO 14001 / ISO 45001 / ISO 9712 / CE / CSA W47.1 / CNAS accredited laboratory

Send the duty, get a sized proposal

Tell us the ore, the throughput and the target product. Our process engineers come back with a flowsheet position, a model shortlist and the testwork we would need to confirm it.

Request a Quote Read the selection guide