Material Handling

Feeding Equipment

Feeding equipment sits at the front of most mineral processing circuits. It accepts raw mine run and transfers it at a controlled rate into primary crushers, grinding mills or conveyors. A poorly chosen feeder causes downstream bottlenecks, spillage and excessive wear.

Request a Quote Selection variables

Feeding Equipment manufactured by Xinhai — Feeding Equipment

Equipment in this category

On this page you evaluate the feeder types Xinhai Mining supplies and decide which mechanism suits your ore's physical character, bin geometry and process control demand.

The range spans heavy-duty plate and grizzly vibrating feeders for large lump primary material, through electromagnetic and inertial vibrators for fine control, to belt and disc feeders for dry, free-flowing product. Each feeder type addresses a distinct combination of material size, abrasiveness and flow behaviour.

ZSW Vibrating Feeder
Plate Feeder
Chute Feeder
Pendulum Feeder
Grizzly Vibrating Feedercat.
Electromagnetic Vibrating Feedercat.
Inertial Vibrating Feedercat.
Belt Feedercat.
Disc Feedercat.

Names marked cat. follow the equipment handbook rather than the product catalogue naming.

What decides the selection

Start with the largest lump the feeder must handle and the bin pressure it will sit under. Then define the required feed-rate range and how precisely the flow must follow the downstream demand. Moisture and stickiness often dictate whether a chute or belt solution works. Testwork on representative samples confirms flow behaviour, wear response and the real speed-adjustment window.

Maximum lump size
Bulk density
Moisture and stickiness
Feed capacity
Speed adjustment range
Bin pressure
Wear resistance
Fluctuation tolerated by downstream equipment

Technical parameters

150 models across 8 machine types, as published in the Xinhai equipment application manual.

Parameter boundary

These are standard-model catalogue figures. Actual capacity, power draw and wear life shift with ore properties, feed gradation and circuit conditions. Treat them as a shortlisting aid, not as a performance guarantee for your duty. Final selection rests on testwork, flowsheet calculation and a written confirmation from the manufacturer.

Chute Feeder

Chute Feeder technical parameters, 5 models
Model	Discharge Opening Size (Width x Height) (mm)	Maximum Feed Size (mm)	Feed Capacity (t/h)	Motor Power (kW)	Weight (kg)
CG600×500	600×500	200	10-50	4	1045
CG750×500	700×500	200	10-60	4	1109.5
CG1100×750	700×600	350	30-70	7.5	1199.2
CG1240×980	900×800	350	36-90	7.5	1710
CG1600×1250	1150×800	350	50-100	15	2505

Bar Vibrating Feeder

Bar Vibrating Feeder technical parameters, 6 models
Model	Chute Dimensions (mm)	Maximum Feed Size (mm)	Feed Capacity (t/h)	Motor Power (kW)	Dimensions (mm)	Weight (kg) (Excluding Motor and Oil Station)
ZSW9538	3800×950	550	90-280	18.5	3876×1494×1305	3780
ZSW1142	4200×1100	650	120-380	22	4276×1644×1305	4280
ZSW1350	5000×1300	800	280-500	30	5100×1960×1880	8700
ZSW1550	5000×1500	1000	500-800	30	5400×2208×1985	11600
ZSW1860	6000×1800	1100	700-1200	45	6100×2540×2090	16000
ZSW2060	6000×2000	1200	800-1500	55	6100×2740×2090	17350

Heavy Duty Plate Feeder

Heavy Duty Plate Feeder technical parameters, 26 models
Model	Chain Plate	FeedParticle Size(mm)	Feed Capacity( m^3/h )	Motor	Dimensions(mm)	Weight(kg)
Width(mm)	Sprocket CenterDistance (mm)	Speed(m/s)	Model	Motor Power(kW)
GBZ100-4	1000	4000	≤ 0.1	≤ 400	60-220	YVF2-160L-4	15	6040×3596×1539	16025
GBZ100-5	5000	7040×3596×1539	20100
GBZ100-6	6000	8040×3596×1539	24000
GBZ100-8	8000	YVF2-180L-4	22	10040×3626×1539	28800
GBZ120-4.5	1200	4500	≤ 550	110-320	YVF2-160L-4	15	8650×3796×1539	22950
GBZ120-6	6000	8040×3796×1539	27160
GBZ120-8	8000	YVF2-180L-4	22	10040×3826×1539	32398
GBZ120-10	10000	12040×3826×1539	37756
GBZ120-12	12000	14040×3826×1539	43301
GBZ150-6	1500	6000	≤ 700	150-350	YVF2-180L-4	22	8040×4126×1539	29612
GBZ150-8	8000	YVF2-225M-6	30	10040×4382×1539	38018
GBZ150-10	10000	12040×4382×1539	43860
GBZ150-12	12000	YVF2-280S-6	45	14040×4482×1539	50410
GBZ180-6	1800	6000	≤ 800	250-550	YVF2-180L-4	22	8070×4434×1539	31898
GBZ180-8	8000	YVF2-225M-6	30	10070×4690×1539	40631
GBZ180-10	10000	YVF2-280S-6	45	12070×4790×1539	47430
GBZ180-12	12000	14070×4790×1539	54324
GBZ200-6	2000	6000	≤ 900	300-750	YVF2-225M-6	30	8070×4898×1539	36452
GBZ200-8	8000	YVF2-280S-6	45	10070×4998×1539	43316
GBZ200-10	10000	12070×4998×1539	50712
GBZ200-12	12000	14070×4998×1539	58108
GBZ240-6	2400	6000	≤ 1100	400-900	YVF2-225M-6	30	8070×5298×1539	39346
GBZ240-8	8000	YVF2-280S-6	45	10070×5398×1539	47295
GBZ240-10	10000	12070×5398×1539	55043
GBZ240-12	12000	YVF2-280M-6	55	14070×5398×1539	65000

Electromagnetic Vibrating Feeder

Electromagnetic Vibrating Feeder technical parameters, 12 models
Model	Feed Capacity (t/h)	Feed Particle Size (mm)	Double Amplitude (mm)	Vibration Frequency (Times/min)	Supply Voltage (V)	Current (A)	Active Power (kW)	Weight (kg)
Level	-10°	Working Current	Indicating Current
GZ1	5	7	50	1.75	3000	220	1.34	1	0.06	77
GZ2	10	14	50	3	2.3	0.15	151
GZ3	25	35	75	4.6	3.8	0.2	233
GZ4	50	70	100	8.4	7	0.45	460
GZ5	100	140	150	12.7	10.6	0.65	668
GZ6	150	210	200	1.5	380	16.4	13.3	1.5	1271
GZ7	250	350	250	24.6	20	2.5	1920
GZ8	400	560	300	39.4	32	4	3040
GZ9	600	840	500	47.6	38.6	5.5	3750
GZ10	750	1050	500	39.4×2	32×2	4.0×2	6491
GZ11	1000	1400	500	47.6×2	38.6×2	5.5×2	7680

Inertial Vibrating Feeder

Inertial Vibrating Feeder technical parameters, 28 models
Model	Feed Chute Dimensions (mm)	Feed Capacity (t/h)	Maximum Feed Size (mm)	Vibration Frequency (Times/min)	Double Amplitude (mm)	Rated Voltage (V)	Rated Current (A)	Power Frequency (Hz )	Power (kW)	Weight (kg)
Level	-10°
GZG400-4	400×1000×200	30	40	100	1450	4	380	2×0.73	50	2×0.25	171
GZG500-4	500×1000×200	60	85	150		4		2×0.73		2×0.25	202
GZG600-4	630×1250×250	110	150	200		4		2×1.53		2×0.55	379
GZG700-4	700×1029×250	120	170	200		4		2×1.53		2×0.55	389
GZG800-4	800×1500×250	160	230	250		4		2×1.95		2×0.75	563
GZG900-4	900×1483×250	180	250	250		4		2×1.95		2×0.75	613
GZG1000-4	1000×1750×250	270	380	300		4		2×2.71		2×1.1	762
GZG1100-4	1100×1673×250	300	420	300		4		2×2.71		2×1.1	854
GZG1250-4	1250×2000×315	460	650	350		4		2×3.51		2×1.5	1099
GZG1300-4	1300×2040×300	480	670	350		4		2×3.51		2×1.5	1117
GZG1500-4	1500×2250×300	720	1000	500		3.5		2×5.19		2×2.2	1477
GZG1600-4	1600×2500×315	770	1100	500		4		2×6.82		2×3.0	1555
GZG1800-4	1800×2325×375	900	1200	500		3		2×6.82		2×3.0	2350
GZG2000-4	2000×3000×400	1000	1400	500		2.5		2×6.82		2×3.0	2705
GZG700-6	700×1029×250	130	180	200	960	5		2×1.66		2×0.55	385
GZG800-6	800×1500×250	170	250	250		5		2×1.66		2×0.55	510
GZG900-6	900×1483×250	200	270	250		5		2×1.66		2×0.55	561
GZG1000-6	1000×1750×250	290	410	300		5		2×2.14		2×0.75	652
GZG1100-6	1100×1673×250	320	450	300		5		2×2.97		2×1.1	795
GZG1250-6	1250×25000×315	500	700	350		5		2×2.97		2×1.1	1002
GZG1300-6	1300×2040×300	520	720	350		5		22×3.84		2×1.5	1070
GZG1500-6	1500×2250×300	780	1080	500		5		2×5.55		2×2.2	1414
GZG1600-6	1600×2500×315	830	1190	500		5		2×5.55		2×2.2	1720
GZG1800-6	1800×2325×375	970	1320	500		5		2×7.28		2×3.0	2288
GZG2000-6	2000×3000×400	1000	1400	600		4		2×12		2×4	2705
GZG2200-6	2200×3400×500	1200	1550	700		5		2×18		2×5.5	6541
GZG2400-6	2400×3700×600	1400	1700	700		5		2×18		2×5.5	7600

Pendulum Feeder

Pendulum Feeder technical parameters, 3 models
Model	Feed Opening Size (mm)	Discharge Opening Size (mm)	Eccentric Wheel Stroke (mm)	Swing Count (n/min)	Maximum Feed Size (mm)	Feed Capacity (t/h)	Motor Power (kW)	Motor Speed (r/min)	Weight (kg)
BG300×300	300×300	300×(30-125)	0-90	46	30	6.5	0.75	1390	150
BG400×400	400×400	400×(50-130)	0-170	45.5	35	12	1.1	1410	176
BG600×600	600×600	600×(50-150)	0-157	48	50	40-80	1.5	940	450

Belt Feeder

Belt Feeder technical parameters, 43 models
Model	Belt Width (mm)	Center Distance of Head and Tail Pulley (mm)	Head and Tail Pulley Diameter (mm)	Feed Capacity (m3/h)	Feed Particle Size (mm)	Motor Power (kW)	Weight (kg)
PG500×1500	500	1500	219	4-40	0-50	2.2	483
PG500×2000	2000	219	4-40	0-50	2.2	550
PG500×2200	2200	219	4-40	0-50	2.2	580
PG500×2500	2500	219	4-40	0-50	2.2	605
PG500×3000	3000	219	4-40	0-50	2.2	620
PG500×4000	4000	219	4-40	0-50	2.2	955
PG650×2000	650	2000	219	4-40	0-50	2.2	550
PG650×2200	2200	219	4-40	0-50	2.2	570
PG650×2500	2500	219	4-40	0-50	2.2	595
PG650×3000	3000	219	4-40	0-50	2.2	645
PG650×4000	4000	219	4-40	0-50	2.2	760
PG800×2000	800	2000	219	15-150	0-80	4	721
PG800×2200	2200	219	15-150	0-80	4	750
PG800×2500	2500	219	15-150	0-80	7.5	790
PG800×3000	3000	219	15-150	0-80	7.5	857.3
PG800×4000	4000	219	15-150	0-80	7.5	1012
PG800×4500	4500	219	15-150	0-80	7.5	1100
PG1000×2000	1000	2000	400	50-450	0-100	5.5	1241
PG1000×3000	3000	400	50-450	0-100	7.5	1400
PG1000×3500	3500	400	50-450	0-100	7.5	1570
PG1000×4000	4000	400	50-450	0-100	7.5	1875
PG1000×4500	4500	400	50-450	0-100	7.5	2000
PG1000×5000	5000	400	50-450	0-100	11	5278
PG1000×6000	6000	400	50-450	0-100	11	5514
PG1000×7000	7000	400	50-450	0-100	11	5833
PG1000×8000	8000	400	50-450	0-100	11	6200
PG1200×3000	1200	3000	446	55-540	0-100	11	1650
PG1200×4000	4000	446	55-540	0-100	11	2000
PG1200×5000	5000	446	55-540	0-100	11	2288
PG1200×6000	6000	446	55-540	0-100	11	3085
PG1200×7000	7000	446	55-540	0-100	11	5014
PG1200×8000	8000	446	55-540	0-100	11	5800
PG1400×5000	1400	5000	446	60-620	0-100	15	5550
PG1400×6000	6000	446	60-620	0-100	15	5828
PG1400×7000	7000	446	60-620	0-100	15	6000
PG1400×8000	8000	446	60-620	0-100	15	6200
PG1600×5000	1600	5000	446	70-720	0-100	15	3200
PG1600×6000	6000	446	70-720	0-100	15	3700
PG1600×7000	7000	446	70-720	0-100	15	4100
PG1600×8000	8000	446	70-720	0-100	15	4600
PG1800×6000	1800	6000	446	80-800	0-100	15	4812
PG1800×7000	7000	446	80-800	0-100	15	5300
PG1800×8000	8000	446	80-800	0-100	15	5750

Disc Feeder

Disc Feeder technical parameters, 27 models
Type	Model	Disk Diameter (mm)	Disk Speed (r/min)	Maximum Feed Size (mm)	Feed Capacity (m3/h)	Motor Power (kW)	Weight (kg)
Suspended Open	DK-6	600	7.53	25	2-4	1.1	410
DK-8	800	7.53	30	3-8	1.1	600
DK-10	1000	7.5	40	3-17	1.5	725
DK-12	1200	9	40	4-25	4	681
DK-13	1300	6.5	50	4-28	3	1000
DK-16	1600	6	50	7-48	7.5	1600
DK-18	1800	6	50	9-60	7.5	1800
DK-20	2000	5	50	13-88	11	3260
DK-30	3000	5	50	20-100	11	5500
Suspended Closed	DB-3	300	10.4	20	0.5-2	0.55	441
DB-4	400	10.7	20	1-2	1.1	452
DB-5	500	10.7	20	1-2	1.1	471
DB-6	600	10	20	2-4	1.1	490
DB-8	800	9	30	3-8	1.1	597
DB-10	1000	9	30	3-17	1.5	906
DB-13	1300	8	30	4-27	3	1240
DB-15	1500	7.5	40	7-48	5.5	2007
DB-20	2000	7.5	50	13-88	11	3877
Seated Open	RK-10	1000	7.5	40	3-14	2.2	740
RK-15	1500	7.5	50	4-25	5.5	1280
RK-17	1700	7.5	50	8-50	5.5	1320
RK-20	2000	7.5	50	15-100	11	1754
Seated Closed	RB-10	1000	6.3	30	3-13	3	1223
RB-15	1500	6.6	40	4-30	7.5	2710
RB-20	2000	4.79	50	11-80	11/15	5234
RB-25	2500	4.72	50	15-120	18.5/22	7747
RB-30	3000	3.1	50	30-180	22	13350

Previous stageDrying and Pelletizing Equipment Next stageConveying Equipment

30+

years in mining equipment

1,000+

equipment models

70+

ore types processed

100+

countries reached

ISO 9001 / ISO 14001 / ISO 45001 / ISO 9712 / CE / CSA W47.1 / CNAS accredited laboratory

Send the duty, get a sized proposal

Tell us the ore, the throughput and the target product. Our process engineers come back with a flowsheet position, a model shortlist and the testwork we would need to confirm it.

Request a Quote Read the selection guide