Material Handling
Dust Collection Equipment
Crushing, screening, conveying and storage generate dust that must be controlled for worker safety, environmental compliance and reliable operation. The right system depends on dust load, particle nature and site conditions.
Equipment in this category
This page surveys the dry and wet dust collection equipment Xinhai Mining supplies. It helps you narrow the choice between bag filters, cartridge units, wet scrubbers and spray suppression.
The range spans dry filtration, wet scrubbing, and dust suppression. Pulse jet bag filters and cartridge collectors handle high-volume fine dust. Top-mounted units suit constrained layouts. Wet scrubbers and the CCJ/A unit manage sticky or explosive material. Spray suppression covers transfer points and stockpiles with water where air quality targets permit.
- Pulse Jet Bag Filtercat.
- Cartridge Dust Collectorcat.
- Top-Mounted Dust Collectorcat.
- High-Efficiency Wet Scrubbercat.
- CCJ/A Wet Scrubber Unitcat.
- Spray Dust Suppression Unitcat.
Names marked cat. follow the equipment handbook rather than the product catalogue naming.
What decides the selection
Selection begins with a dust sample. Lab analysis determines particle size, concentration and explosivity. Simultaneously, site data on air volume, temperature, humidity and water supply constrain the technology. Emission limits set the target collection efficiency, while pressure drop and cleaning method influence operating cost. Xinhai Mining's lab tests dust to define these inputs.
- Air volume
- Inlet dust concentration
- Particle size
- Temperature and humidity
- Explosibility
- Emission limit
- Filtration velocity and pressure drop
- Cleaning method
- Water availability
Technical parameters
91 models across 3 machine types, as published in the Xinhai equipment application manual.
These are standard-model catalogue figures. Actual capacity, power draw and wear life shift with ore properties, feed gradation and circuit conditions. Treat them as a shortlisting aid, not as a performance guarantee for your duty. Final selection rests on testwork, flowsheet calculation and a written confirmation from the manufacturer.
Chamber Jetting Bag Dust Remover
| Parameter Model | Processing Air Volume (m3/h) | Filtering Wind Speed (m/min) | Total Filtration Area (m2) | Number of Filter Bags (pcs) | Resistance (Pa) | Dust Concentration (g/m3) | Insulation Layer Area (m2) | Weight (kg) |
|---|---|---|---|---|---|---|---|---|
| FMPD32-3 | 4500 | 1.2-2.0 (Note: The design should verify the wind speed and volume according to local environmental emission standards. The air volume and wind speed are based on project design; this parameter is for reference only.) | 93 | 96 | 1470-1770 | < 1000 | 26.5 | 2880 |
| FMPD32-4 | 6900 | 124 | 128 | 34 | 4080 | |||
| FMPD32-5 | 8930 | 155 | 160 | 41 | 5280 | |||
| FMPD32-6 | 11160 | 185 | 192 | 48.5 | 6480 | |||
| FMPD64-4 | 13390 | 248 | 256 | 70 | 7280 | |||
| FMPD64-5 | 17800 | 310 | 320 | 94 | 9960 | |||
| FMPD64-6 | 22300 | 372 | 384 | 118 | 11640 | |||
| FMPD64-7 | 26700 | 434 | 448 | 142 | 13320 | |||
| FMPD64-8 | 31200 | 496 | 512 | 166 | 15000 | |||
| FMPD96-4 | 20288 | 372 | 384 | 110 | 10452 | |||
| FMPD96-5 | 26800 | 465 | 480 | < 1300 | 120 | 12120 | ||
| FMPD96-6 | 33400 | 557 | 576 | 130 | 14880 | |||
| FMPD96-7 | 40100 | 657 | 672 | 140 | 16920 | |||
| FMPD96-8 | 46800 | 744 | 768 | 150 | 19810 | |||
| FMPD96-9 | 53510 | 836 | 864 | 160 | 21240 | |||
| FMPD 96-2×5 | 60100 | 929 | 960 | 175 | 25200 | |||
| FMPD 96-2×6 | 74000 | 1121 | 1152 | 210 | 30240 | |||
| FMPD 96-2×7 | 87400 | 1308 | 1344 | 245 | 35280 | |||
| FMPD 96-2×8 | 100870 | 1494 | 1536 | 280 | 40320 | |||
| FMPD 96-2×9 | 114340 | 1681 | 1728 | 315 | 45360 | |||
| FMPD 96-2×10 | 127800 | 1868 | 1920 | 350 | 50400 | |||
| FMPD128-6 | 56088 | 935 | 768 | 125 | 24120 | |||
| FMPD128-9 | 89700 | 1402 | 1152 | 196 | 31680 | |||
| FMPD128-10 | 100900 | 1558 | 1280 | 205 | 34680 | |||
| FMPD128-2×6 | 112100 | 1869 | 1536 | 323 | 43920 | |||
| FMPD128-2×7 | 133650 | 2181 | 1792 | 247 | 52680 | |||
| FMPD128-2×8 | 154100 | 2492 | 2084 | 262 | 60000 | |||
| FMPD128-2×9 | 174700 | 2840 | 2304 | 277 | 66480 | |||
| FMPD128-2×10 | 201900 | 3115 | 2561 | 292 | 72000 | |||
| FMPD128-2×11 | 215880 | 3427 | 2856 | 307 | 78480 | |||
| FMPD128-2×12 | 236400 | 3738 | 3072 | 322 | 96400 | |||
| FMPD128-2×13 | 269100 | 4050 | 3328 | 337 | 93600 | |||
| FMPD128-2×14 | 291600 | 4361 | 3584 | 252 | 100800 |
High-Efficiency Wet Dust Remover
| Model | Air Volume ( m^{3}/h ) | Static Pressure (Pa) | Water Consumption (t/h) | Motor Power (kW) |
|---|---|---|---|---|
| HE09 | 4000-6000 | 1000-1400 | 1 | 15 |
| HE12 | 9000-12000 | 1.8 | 22 | |
| HE16 | 14000-21000 | 3.1-4 | 37 | |
| HE18 | 23000-26000 | 4.6-5.2 | 55 | |
| HE22 | 29000-36000 | 5.8-7.2 | 75 | |
| HE24 | 39000-46000 | 7.8-9.2 | 90 | |
| HE27 | 49000-66000 | 9.8-13.2 | 110 | |
| HE32 | 69000-76000 | 13.8-15.2 | 160 |
CCJ/A Type Wet Dust Remover Assembly
| Model/Associated Data | CCJ/A-5 | CCJ/A-7 | CCJ/A-10 | CCJ/A-14 | CCJ/A-20 | CCJ/A-30 | CCJ/A-40 | CCJ/A-60 | ||
|---|---|---|---|---|---|---|---|---|---|---|
| Dust Collector | Air Volume ( m^3/h ) | 5000 | 7000 | 10000 | 14000 | 20000 | 30000 | 40000 | 60000 | |
| Equipment Resistance (Pa) | 1000-1200 | |||||||||
| Purification Efficiency % | >97 | |||||||||
| Ventilator | 4-72-II Type Ventilator | Model | 4A | 4.5A | 5A | 6C | 8C | 8C | 10C | 12C |
| Speed (r/min) | 2900 | 2900 | 2900 | 2240 | 1600 | 1800 | 1250 | 1120 | ||
| Air Volume ( m^3/h ) | 4020-7420 | 5730-10580 | 7950-14720 | 11900-17100 | 17920-31000 | 20100-34800 | 34800-50150 | 53800-77500 | ||
| Total Pressure (Pa) | 2040-1340 | 2580-1700 | 3240-2240 | 2720-2290 | 2520-1880 | 3180-2410 | 3180-2410 | 2770-2190 | ||
| Motor | Model | Y132S1-2 | Y132S2-2 | Y160M2-2 | Y180M-4 | Y180M-2 | Y200L2-2 | Y225M-4 | Y280S-4 | |
| Power (kW) | 5.5 | 7.5 | 15 | 18.5 | 22 | 37 | 55 | 75 | ||
| Water Consumption | Evaporation (kg/h) | 17.5 | 24.5 | 35 | 49 | 75 | 105 | 140 | 210 | |
| Overflow (kg/h) | 150 | 210 | 300 | 420 | 600 | 900 | 1200 | 1800 | ||
| Bottom Flow (kg/h) | 425 | 602 | 860 | 1200 | 1700 | 2550 | 3400 | 5100 | ||
| Flushing Volume ( m3 ) | 0.48 | 0.66 | 1.04 | 1.2 | 1.7 | 2.5 | 3.4 | 5 | ||
| Unit Weight (kg) | 791 | 956 | 1196 | 2426 | 3277 | 3955 | 4989 | 6765 | ||
| Remarks | The power of the solenoid valve used in the automatic water level control system is 80 VA. |
| Model | XW1/1 | XW1/2 | XW1/3 | XW1/4 | XW1/5 | XW1/6 |
|---|---|---|---|---|---|---|
| Power (kW) | 1.1 | 2 | 3 | 4 | 7.5 | 11 |
| Voltage (V) | 380 | |||||
| Input Line System | Three-Phase Five-Wire | |||||
| Maximum Spray Flow Rate (t/h) | 0.3 | 0.6 | 0.9 | 1.25 | 2 | 4 |
| Inlet Size | 0.5"/DN15 | 0.5"/DN15 | 0.5"/DN15 | 1"/DN25 | 1.5"/DN40 | 2"/DN50 |
| Outlet Size | 1/8"-1 | 1/8"-1 | 1/8"-2 | 1/8"-3 | 1/4"-2 | 1/2"-2 |
| Dimensions (mm) | 1400×700×1600 | |||||
| Water Supply | Sub-Water Tank Automatic Control | |||||
| Signal | 4-20mA Current Signal | |||||
| Control System | PLC Programmable Control System |
| Model/Specifications | ECMC-11 | ECMC-15 | ECMC-20 | ECMC-30 | ECMC-40 | |
|---|---|---|---|---|---|---|
| ECMC Series Top Dust Remover | Air Volume ( m^3/h ) | 720-990 | 1040-1420 | 1500-2100 | 2100-2900 | 2800-3800 |
| Fan Power (kW) | 2.2 | 2.2 | 4 | 4 | 5.5 | |
| Filter Bag Specification (mm) | φ140x1000 | φ140x1000 | φ140x1500 | φ140x1500 | φ140x2000 | |
| Number of Filter Bags | 25 | 36 | 36 | 49 | 49 | |
| Filtration Area ( m2 ) | 11 | 15.8 | 23.7 | 32.3 | 43.1 | |
| Pulse Valve Specification | 1.0" | |||||
| Number of Pulse Valves | 5 | 6 | 6 | 7 | 7 | |
| Filter Bag Material | Coated Polyester Fiber | |||||
| Cleaning Method | Pulse Cleaning | |||||
| Equipment Dimensions (mm) | Length (mm) | 1100 | 1300 | 1300 | 1470 | 1470 |
| Width (mm) | 1100 | 1300 | 1300 | 1470 | 1470 | |
| Height (mm) | 1400 | 1400 | 1900 | 1900 | 2400 | |
| Purification Efficiency % | >99.5 |
| Model/Specifications | ETMC I-8 | ETMC I-12 | ETMC I-16 | ETMC II-24 | ETMC III-36 | ETMC IV-48 | ETMC IV-60 | ETMC IV-72 | |
|---|---|---|---|---|---|---|---|---|---|
| Filter Cartridge Main Unit Specifications | Air Volume (m3/h) | 2250-4500 | 3380-6760 | 4500-9000 | 6760-13520 | 10150-20300 | 13530-27060 | 16920-33840 | 20300-40600 |
| Fan Power (kW) | 5.5 | 7.5 | 11 | 15 | 22 | 30 | 37 | 45 | |
| Number of Filter Cartridges | 8 | 12 | 16 | 24 | 36 | 48 | 60 | 72 | |
| Filtration Area (m2) | 75.2 | 112.8 | 150.4 | 225.6 | 338.4 | 451.2 | 564 | 676.8 | |
| Pulse Valve Specification | 1.0" | ||||||||
| Number of Pulse Valves | 4 | 6 | 8 | 12 | 18 | 24 | 30 | 36 | |
| Filter Bag Materia | Coated Polyester Fiber | ||||||||
| Cleaning Method | Pulse Cleaning | ||||||||
| Equipment Dimensions (mm) | Length (mm) | 1100 | 1100 | 1100 | 2200 | 3300 | 4400 | 5500 | 6600 |
| Width (mm) | 1860 | 1860 | 1860 | 1860 | 1860 | 1860 | 1860 | 1860 | |
| Height (mm) | 2900 | 3400 | 3900 | 3400 | 3400 | 3400 | 3400 | 3400 | |
| Purification Efficiency % | >99.5 |
ISO 9001 / ISO 14001 / ISO 45001 / ISO 9712 / CE / CSA W47.1 / CNAS accredited laboratory
Send the duty, get a sized proposal
Tell us the ore, the throughput and the target product. Our process engineers come back with a flowsheet position, a model shortlist and the testwork we would need to confirm it.